Links

 

The Flexifill SA2M is an aseptic semi-automatic Bag-in-Box filler, capable of filling a wide range of low or high acid products including dairy products, juices, purées and concentrates from 2 to 20 litres.

Bags can either be loaded from the front of the machine and filled by the operator. Or, the bags can be filled on a driven roller table and discharged out the back of the machine onto a conveyor system. This can then be linked to automatic bag-in-box insertion and closure.

The machine has a high degree of flexibility and can handle all standard Bag-In-Box fitments and bags used in the aseptic market.


The filler has as standard full CIP (clean in place) & SIP (sterilise in place) modes and can be steam sterilised. A turbine flowmeter is fitted as standard with magnetic and mass flowmeters as options.

Manufactured with 316 Stainless Steel product contact surfaces and 304 main frame these machines are built to a high standard and comply with CE marking requirements.

Options

  • Centrifugal pump and motor with stainless steel cover.
  • Integrated boiler.
  • Automatic tap insertion.

automatic tap insertion

integrated boiler

product pump


Operational Description

The bag is placed manually on the filling table and gland is inserted into the jaws. Press two-hand start and gland is steam sterilised, outer membrane pierced and product filled to pre-determined amount. When filled, rear membrane is heat sealed to back of gland to ensure product sterility. Gland is again steam flushed and jaws opened to enable bag loading.

Performance

Typical output filling at 2 litre per/sec flow rate to the filler is :-
7 to 8 x 10 litre bags per/min. manual loading