 |
The
Flexifill SA1M is an aseptic semi-automatic Bag-in-Box filler, capable
of filling a wide range of low or high acid products including dairy
products, juices, purées and concentrates from 2 to 20 litres.
Bags can either be loaded from the front of the machine and
filled by the operator. Or, the bags can be filled on a
driven roller table and discharged out the back of the machine onto a
conveyor system. This can then be linked to automatic bag-in-box
insertion and closure. |
 |
The machine has a high degree of flexibility and can
handle all standard Bag-In-Box fitments and bags used in the aseptic
market.
The filler has as standard full CIP (clean in place) & SIP
(sterilise in place) modes and can be steam sterilised.
A turbine flowmeter is fitted as standard with magnetic and mass
flowmeters as options.
Manufactured with 316 Stainless Steel product contact surfaces and 304
main frame these machines are built to a high standard and comply with
CE marking requirements.
Options
- Centrifugal pump and motor with
stainless steel cover.
- Integrated boiler.
- Automatic tap insertion.
|
 |
 |
 |
|
automatic tap
insertion |
integrated boiler |
product pump |
|
Operational Description
The bag is placed manually on the filling table and gland is
inserted into the jaws. Press two-hand start and gland is steam
sterilised, outer membrane pierced and product filled to pre-determined
amount. When filled, rear membrane is heat sealed to back of gland to
ensure product sterility. Gland is again steam flushed and jaws opened to
enable bag loading. |
Performance
Typical output filling at 2 litre per/sec flow rate to the filler is :-
3.5 to 4 x 10 litre bags per/min.
 |
